| 1/23/2004 |
Enetics releases version 2.87 of PowerScape
[download]. This version
adds support for reporting flicker. Flicker is supported
in selected recorder models with version 1.25 firmware.
Contact Enetics for details and/or to obtain a firmware
update. |
| 1/23/2004 |
Enetics releases version 2.12 of Excel Macros
[download]. This version
adds support for flicker. Note that these macros require
PowerScape version 2.87 or later. |
| 12/10/2003 |
Enetics releases version 2.86 of PowerScape.
This version
allows multiple files to be selected for import in addition to
improved support for 3-wire delta configurations. |
| 11/12/2003 |
Enetics releases version 2.11 of Excel Macros. This version
includes some minor enhancements, improved error checking, and
a bug fix for displaying daylight saving time data. Note that PowerScape
version 2.84 or higher must be installed in order for this version of
the macros to operate properly. |
| 11/12/2003 |
Enetics releases version 2.85 of PowerScape.
This version
allows users to specify waveform capture trigger levels of
less than 1% if desired. |
| 10/17/2003 |
Enetics releases version 2.0 of Excel Macros to the website. This version uses an improved chart
type that allows for easy zooming and panning in addition to
support for displaying frequency. Note that PowerScape
version 2.84 must be installed in order for this version of
the macros to operate properly. |
| 10/17/2003 |
Enetics releases version 2.84 of PowerScape
to the website. This version adds support for
reporting frequency when the PowerNode firmware is updated to
version 1.23 (contact Enetics for a firmware update). PowerScape also now has the capability to
install the Excel macros if not already installed. |
| 7/25/2003 |
Enetics releases version 1.29 of Excel
Macros. This version adds support for displaying
current THD and current harmonics as percent of the
fundamental when configured in PowerScape version 2.82.
There is also a new chart type that displays voltage and
current simultaneously. |
| 7/25/2003 |
Enetics releases version 2.82 of
PowerScape. This version allows the user to select
whether current THD and current harmonics are displayed as
percent of the fundamental or as RMS amps (default).
More detailed scaling information is now presented in the
recorder setup screens when using a dual-range CT, custom CT,
or specifying a CT ratio when monitoring the secondary of a
current transformer. |
| 5/29/2003 |
Press Release: Web-based Energy
Monitoring System Provides Real-Time Mobile Notification and
Fault Alerts. Click here to download
the full press release in PDF format. |
| 5/7/2003 |
Enetics releases version 1.28 of Excel
Macros. This version has some minor enhancements and
improved error handling. |
| 5/7/2003 |
Enetics releases version 2.80 of
PowerScape. New notification feature added.
Now PowerScape can alert you by e-mail whenever a programmable
alarm is tripped. This feature requires upgraded
recorder firmware, which is included in the software download. |
| 4/10/2003 |
Enetics receives Meter Data Service Provider
(MDSP) status in New York State. Enetics has
received certification to provide MDSP services in NYS, which
includes: meter reading, CAVEE services, billing and
communications services, as well as load curtailment and
energy management services. |
| 2/26/2003 |
Enetics releases version 1.27 of Excel
Macros. This version has an enhanced demand report
that computes the 15-minute, 30-minute, and 60-minute peak kW
using a rolling method from the existing interval data.
This also has an enhanced query capability and enhanced
support for reporting results from delta installations. |
| 2/26/2003 |
Enetics releases version 2.72 of
PowerScape. This version has enhanced support for
3-wire delta installations (requires firmware upgrade to
version 1.21 or later; Please contact
Enetics to request a firmware upgrade if necessary). |
| 12/13/2002 |
Enetics releases version 1.26 of Excel
Macros. This version has added a Demand Report
button and support for viewing total building power factor and
harmonics up to the 25th. |
| 12/13/2002 |
Enetics releases version 2.64 of
PowerScape. This version has enhanced setup menus
and support for viewing total building power factor and
harmonics up to the 25th. |
| 12/13/2002 |
Enetics announces a NEW LM-5515 product that
has all the power quality monitoring features except relay
controls. For product naming consistency, Enetics'
existing LM-5420 product has been renamed to LM-5415. Note
that the specifications and capabilities of the LM-5415
product are identical to the discontinued LM-5420. |
| 10/3/2002 |
Enetics releases version 1.24 of Excel
Macros. This version has improvements for dealing
with partial intervals. |
| 10/3/2002 |
Enetics releases version 2.63 of
PowerScape. This version has support for LM-1302
recorders as well as some enhancements to the setup menus. |
| 7/29/2002 |
Enetics releases version 1.23 of Excel
Macros. This version corrects some problems when
using dd/mm/yyyy date formats. |
| 5/14/2002 |
Enetics releases version 2.61 of PowerScape
and version 1.22 of the Excel Macros. |
| 12/3/2001 |
Enetics releases a new, single-user version
of its PowerScape software. This software is available
free of charge for use with all PowerNode recorders. |
| 10/1/2001 |
New Website Launched. |
