LM-5300 Series PowerNode Recorder / Analyzer

LM-5300 Board Set Power Analyzer/Recorder 
For volume OEM applications

Board Set for high-volume OEMs Three Phase 600v Monitor / Recorder Power Quality + Power Consumption Modem/Paging Options Self-Powered Dual Range Flexible SMART CT’s Pre-programmed 3 Year Warranty

The LM-5300 series comprises two unique 3-phase 600v board configurations and three embedded software packages (Models LM-5310/15 and LM-5320) each capable of simultaneously recording 4 voltages, 4 currents with events and power consumption. The 5315 and 5320 add harmonic and waveform capture capability. The fourth voltage and current channels allow neutral-ground voltage and neutral or ground current to be recorded. The emphasis is on meeting practical power monitoring needs for volume Original Equipment Manufacturers that have their own existing packaging platform.  Please contact Enetics for complete details.

Monitoring and analysis capabilities track those of Enetics' own line of recorder / analyzers. 

Software

The LM-5300 series is compatible with Enetics PowerScape (LMS-5700) software which consists of two major components, the database (SQL) and the charting/reporting software. The database automatically aggregates data collected from one or more designated sites. Data is easily retrieved to generate the required charts and reports. For user flexibility and extensibility, charts and reports are generated in Microsoft Excel. The Excel worksheet data file can then be exported in various formats and shared among users. Zooming and panning is available on the charts. A key advantage of using an SQL database and Excel is that it is an “open” system, you are not locked into any suppliers’ proprietary software. You can retrieve any data available from the database and/or use the Excel data to generate additional charts and reports.

Specifications

Channels:
Voltage   -    4 (single-ended)
Current   -    4 (Simultaneous current and voltage sampling)

Range:
Voltage   -    20-600vac
Current   -    CT Dependent (10ma-10,000A)

Memory:
Non-volatile 4MB.

Sample Rate/Response Time:
32 samples/cycle for interval data
128 samples/cycle for harmonic analysis

Accuracy:
Voltage         -    0.2% reading + 0.1% FS
Current         -    0.2% reading + 0.2% FS
Power            -    0.5% reading + 0.01% FS
Power Factor  -    + 1%
THD              -    + 1%

Response Time/Recording Interval
Response Time:  1 cycle
Recording Interval: 15 sec to 1 hour (Wraparound)
Typical Recording Time:

15 Min Interv/16 Parameters   - 100 Days min
15 Min Interv/117 Parameters   - 600 Days min
Software reports available recording duration at setup.Waveform and event capture storage is independent of interval data storage.

3000 Sag/Swell events can be stored in non-volatile memory

Harmonics:
Up to 25th

Communications:
Internal Modem Data Rate: 2.4 kbps
Serial Port: 57.6 kbps

Power:
120/240vac, 50/60Hz
Run-through time: 10 sec

Environmental/Physical:
Operating Temp Range: -20ºC to +70ºC
Size: 8.5” x 7” x 2.7” (21.6 x 17.8 x 6.8 cm) Non-conductive Case
Weight: 3.5 lbs (1.6 kg)

"Excel" is a registered trademark of Microsoft Corporation